Haulotte HA100JRT, Operator'S Manual, Page: 85 / 122

A
B
C
D
E
F
G
H
I
85 4000328850 E 12 14 USA / GB
D
- Operation instructions
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
5 - Link piece position check
L i n k p i e c e p o s i t i o n c h e c k
The link piece position reset is automatic when the arm reaches the end of its descent.
To check that the link piece is positioned correctly, the arm must be at the lowest stop point and the
machine on level ground. The upper edge of the link piece must then be horizontal.
The sticker (
44
) placed on the link piece is a second source used in checks.
5
Ensure that nothing is in the way before starting any manoeuvres.
Marking Description
1 If the link piece is not in the correct position, the machine must not be used until this has been corrected
2 Link piece to the front
3 Link piece to the rear
After each work shift, ensure that the arm is fully lowered and rests on the turntable.
If it is impossible to reposition the link piece, DO NOT
use the machine and call the HAULOTTE Services® After
Sales Service
1
2 3
5