Haulotte HA100JRT, Operator'S Manual, Page: 83 / 122

A
B
C
D
E
F
G
H
I
83 4000328850 E 12 14 USA / GB
D
- Operation instructions
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
4.3 - AXLE RETRACTION OPERATION
4.3.1 - For front axle retraction
Use E3 and E4 levers (Refer to figure c).
1. Lower lever ( E3 ).
• The outrigger cylinder is lowered (extended).
• The chassis is lifted.
• The wheels no longer touch the ground.
2. Keep lever ( E3 ) lowered and lift lever ( E4 ) to retract the front axle.
Once the front axle is totally retracted :
3. 1 to 2 s after the buzzer stops, release lever ( E4 ).
4. Lift lever ( E3 ).
• The cylinder is raised (retracted).
• The chassis is lowered.
• The wheels touch the ground.
F i g u r e c
If the two outrigger cylinders are extended, the axle retraction controls are de-activated.
While the axle is being retracted, the buzzer sounds and driving is deactivated. The buzzer stops when the
axle is totally retracted and the outrigger cylinder is completely lowered (extended).
If the buzzer sounds during the movement, the axles are either not fully extended or not fully retracted.