Haulotte Group OPTIMUM 1931 E Maintenance Book Download Page 75

Page: 75 / 148

4000429690

E 11.15

US / GB

Scissor arm

Scissor arms screw - Periodical checks

MS0073

Scissor arm

Scissor arms screw - Periodical checks

1 - You will need

2 - Checks

3 - Tightening the screws of the scissor arms

If the visual check of the marking is not correct (unscrewing), perform tightening with a torque wrench, torque de 22
N.m

• Standard tool kit
• Protective goggles
• Gloves
• Torque spanner - Tightening torques 22 N.m

• Place barriers around the perimeter of the work area

Exclusively use tools and auxiliary average adapted. Always wear necessary safety clothing.

• Daily, visually check the presence of the screw of the scissor arms.

• Once a month, visually check that there's no untightening of screws of the scissor arm.

Summary of Contents for OPTIMUM 1931 E





















































































































































Search results

Summary of Contents for OPTIMUM 1931 E

Reviews:

Related manuals for OPTIMUM 1931 E

Brands by name

Popular brands

Haulotte Group OPTIMUM 1931 E, Maintenance Book

Search results

Summary of Contents for OPTIMUM 1931 E

Reviews:

Related manuals for OPTIMUM 1931 E

Brands by name

Popular brands