Haulotte Group OPTIMUM 1931 E, Maintenance Book

Page: 84 / 148

84 4000429690 E 11.15 US / GB
Platform
Removal / replacement of platform assembly
MS0095
4 - Removal
• The platform can now be removed.
• Cut the 3 cable ties under the platform that hold the platform wiring
loom to the underside of the platform ( 1 near plug and 2 under
platform).
• Disconnect the plug in the harness. Cut the 3 cable ties that hold the
cable going from the plug to the upper control box ( 1 near plug and
2 on the vertical part towards the upper control box).
• Remove the upper control box.
• With the extension deck fully retracted, unscrew the 4 cap head
screws that hold the mounting block for the front pivot pin to the
platform.
• Unscrew the 2 outer bolts that hold the block.
N.B.-:-D
O NOT UNSCREW THE REST OF THE SCREWS THAT HOLD
THE SUPPORT TO THE MACHINE
,
THESE WILL BE LEFT ATTACHED
TO THE PLATFORM
.
• The block is now disconnected, the platform is no longer fixed to the
machine.
N.B.-:-D
O CLIMB INTO THE PLATFORM AS IT IS NO LONGER
SECURED TO THE MACHINE
.