Reel out the Steel Cable (15A), al-
10.
lowing the Wheel Bracket Assembly
(39) to tilt up and out of the Lock (40)
and to lower the front of the motorcy-
cle towards the ground. Release the
Lock as soon as the Wheel Bracket
Assembly is clear of it.
Hold onto the handlebars and ensure
11.
that the motorcycle leans toward the
kickstand.
Release and remove the two Straps
12.
from the motorcycle and Wheel
Bracket Assembly (39).
Lock the empty Wheel Bracket As-
13.
sembly (39) in the loading position,
and load the empty Large Slide Base
(21) back onto the Base Frame (1).
MAInTEnAnCE And
SERvICIng
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO PREvEnT
SERIOuS InjuRY
FROM ACCIdEnTAL
OPERATIOn:
Remove any load from the
Motorcycle Lift before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREvEnT SERIOuS
InjuRY FROM TOOL
FAILuRE:
do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Inspection, Maintenance, and
Cleaning
BEFORE EACH USE, inspect the
1.
general condition of the Motorcycle
Lift Ramp. Check for loose screws,
misalignment or binding of moving
parts, cracked or broken parts, dam-
aged straps, frayed or kinked steel
cable, and any other condition that
may affect its safe operation. Re-
place all damaged parts.
PERIODICALLY, lubricate all moving
2.
parts with automotive grease.
AFTER USE,
3.
clean the external sur-
faces of the Motorcycle Lift Ramp with
a clean cloth.
WHEN STORING, make sure to store
4.
the Motorcycle Lift Ramp in a clean,
dry, safe location out of reach of chil-
dren and other unauthorized persons.
SKU 99900
For technical questions, please call 1-800-444-3353
Page 15