FIguRE O
SMALL
LOCK
PIn
(51)
Reel in the Steel Cable (15A), pulling
16.
the motorcycle up the Slide Base (21)
until the Wheel Bracket Assembly
(39) is at the top of travel. This will
position the motorcycle fully on the
Slide Base.
(See Figure P.)
FIguRE P
Install the Large Lock Pin (50), mak-
17.
ing sure its Safety Pin is in place.
(See Figure Q.)
FIguRE Q
SMALL
LOCK
PIn
(51)
Remove the Small Lock Pin (51) to
18.
allow the Slide Base (21) to load into
the truck bed.
(See Figure R.)
FIguRE R
SMALL
LOCK PIn
(51)
Reel in the Steel Cable (15A) and pull
19.
the Slide Base (21) into the truck bed
until the front of the Slide Base hits
the stop at the end of the Base Frame
(1).
Release the tension on the Steel
20.
Cable (15A) so it is snug.
SKU 99900
For technical questions, please call 1-800-444-3353
Page 12