FIguRE u
SMALL
LOCK PIn
(51)
Remove the Large Lock Pin (50).
6.
(See Figure v.)
FIguRE v
LARgE
LOCK
PIn
(50)
Reel out the Steel Cable (15A), allow-
7.
ing the Wheel Bracket Assembly (39)
to roll down the Slide Base (21). The
rear of the motorcycle will roll onto
the ground.
Once the motorcycle is fully on the
8.
ground, with its front wheel suspend-
ed in the Wheel Bracket Assembly
(39), install the Small Lock Pin (51)
to lock the Wheel Bracket Assembly
(39) in place.
(See Figure X.)
FIguRE X
SMALL
LOCK
PIn
(51)
Lower the kickstand. Reel in the
9.
Winch to tighten the Steel Cable (15A)
and release pressure on the Wheel
Bracket Assembly (39). Pull up on the
Lock (40), and listen to the “click” as
the Lock releases. Continue to pull up
on the Lock.
(See Figure Y.)
FIguRE Y
LOCK
(40)
SKU 99900
For technical questions, please call 1-800-444-3353
Page 14