11
Note
: The Cylinder contains high pressure
gas. Please avoid crash with other objects to
avoid danger.
Note: If the Cylinder is hit, it might be
damaged and cause the usage not smooth.
The treadmill might fall while folding
7.
MAINTENANCE
1. If the belt tends to move off the center, stop
the treadmill. Take the Hex Wrench and adjust the
Hex Screw in the Rear End Cap. For example, if the
running belt is moving towards the left side,
tighten
the
left
Hex
Screw
about
1/4
turn(clockwise); if the running belt is moving
towards the right side, tighten the right Hex Screw
about 1/4 turn(clockwise); Turn on the treadmill
after it has been adjusted. If you find that the belt
has not moved to the proper position, please
repeat the steps above. Don’t use the treadmill
until the running belt returns to the center
position.
(Ps.1. This action is very important, if the belt is not
in the center, be sure to follow above steps.)
(Ps.2. The position of running belt might not stay
precisely in the center with slightly towards the
left and right sides, and the situation varies
with how end-users use and the weight of
end-users. No need to adjust the belt if it
doesn’t rub against the parts aside.)
