22
(Figure 1)
B. When users search the treadmill ascending angle in the low position (Figure 2), must press
the STOP and don’t loosen,, and press the UP at the same time, the two button are pressed
at the same time about 3~5 seconds, incline motor will force the treadmill ascension height
go up, at the same time, please review incline motor feedback error message, whether
change for go up and adjust the feedback value to 100, if the feedback value have change,
the users only need to loosen the key then will return to the original position.
(Figure 2)
3. If the above steps are still can’t exclude the abnormal function of the INCLINE fault, then please
contact the technical personnel of the dealer , you also can force the incline function failure at this
time, for convenience of users at no incline function case can still continue to use the treadmill,
you can press STOP don’t loosen, and press “-“ key at the same time, the two button are pressed
at the same time about 3~5 seconds, ascension will stop at the fault location, and lost the
function . This cancellation action will lose efficacy when restart the treadmill. So before this
problem has been eliminated, if want use this treadmill then need to do above steps again.
** If there is any error message, please contact with sales companies.
