13
CALORIES. This can be done only after starting. It does not need to be set in PROGRAM. It
means you can use the value after starting. You must set it anew after restarting
2.
If the SAFETY key is removed out during the work, then the treadmill will stop running. At this
time, place the SAFETY key back, the beeper will sound and all the values will go back to the
initial position.
3.
Under the common Start / Ready status, the PULSE window will display the HP picture if you
don’t grip the pulse sensor. If you grip the pulse sensor, you will see PULSE window starting to
display the pulse value.
4.
II.
Operation Instruction
1.
Under the Start/Ready position, you can press the
MODE
key directly to enter the edit
program.
2.
Under the Start/Ready position, press the QUICK START key to directly enter the start-up of
Manu run.
3.
When the SAFETY key is taken off and then replaced, it will not initiate a make reposition action
anywhere it is. You need to press the QUICK START key to perform the incline to reposition it.
4.
When the power is on, it will not make any reposition action anywhere it is. You need to press the
QUICK START key to perform the incline to reposition it.
5.
Under the start/ready status, continuously press the stop
STOP
key for 5 seconds; it will initiate
