28
User Controls
INB100005-1 (Rev 19)
IND100064-17
GRAPHIC SCALING MODES:
Selecting this function will enable the user to configure the graphic scaling of the
RGB/DVI or VIDEO image. The change will happen realtime.
Note: Some of these functions will impact on image quality, and will therefore not show the optimal
1:1 picture with correct aspect ratio and resolution suitable for the TFT module.
Scaling methods in PC/DVI MODE:
ONE TO ONE, FILL SCREEN,
FILL TO ASPECT RATIO,
NONLINEAR SCALING MODES
Scaling methods in VIDEO MODE:
NORMAL, LETTERBOX,
LETTERBOX WITH SUBTITLES,
NONLINEAR SCALING MODES
ONE TO ONE:
(Press “+” to access the sub-menu)
HORIZONTAL PAN:
Increase/decrease the horizontal pan.
VERTICAL PAN:
Increase/decrease the vertical pan.
FILL SCREEN
: Enable full screen expansion for lower resolution image.
FILL TO ASPECT RATIO
: Enable full screen expansion for lower resolution image
according to aspect ratio.
LETTERBOX
: Stretches a letterboxed picture to full screen.
LETTERBOX WITH SUBTITLES
: Stretches and pans a letterboxed picture to full screen, which enables
viewing of subtitles in bottom.
NONLINEAR SCALING MODES:
(Press “+” to access the sub-menu)
Will either clip the image off (to black), or stretch/scale the image . This will impact on image quality, and will
therefore not show the optimal 1:1 picture with correct aspect ratio and resolution suitable for the TFT module.
HORIZONTAL CLIPPING:
Increase/decrease the horizontal clipping.
HORIZONTAL OFFSET:
Increase/decrease the horizontal offset.
HORIZONTAL STRETCH:
Increase/decrease the horizontal stretch.
VERTICAL CLIPPING:
Increase/decrease the vertical clipping.
VERTICAL OFFSET:
Increase/decrease the vertical offset.
VERTICAL STRETCH:
Increase/decrease the vertical stretch.
LANGUAGE:
Available languages are: English, Norwegian, Chinese and French. This will affect all
text and messages in the OSD menus.
VIDEO SOURCE:
Selecting this function will enable the user to select the type of input signal to show
fullscreen. Available inputs are: Analog RGB1, Analog RGB2, DVI, Composite
Video, and S-Video
.
The display unit will switch signal source instantly, so if no
signal source is present (physically connected) the image will be black for 1-2
seconds before it resets back to the previous detected signal.
OSD Menu Functions
1
4
2
3
1
4
2
3
4
2
3
4
2
3
2
4
3
2
2
4
3
Summary of Contents for JH 10T06 MMD
