Hatteland HD 12T21 STD-xxx-Fxxx, User Manual

Page: 53 / 90

Specifications - External Module USB (CAN/COM/DIO)
53
IND100129-170
All specifications are subject to change without prior notice!
Specifications - External Module USB (CAN/COM/DIO)
1/2
This information may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS.
The products may not be copied or duplicated in any way.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.
DATA SHEET
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
Hatteland Displays IO module series concept for marine applications adds more functionality to your
Maritime Multi Computers and Maritime Stand-Alone computers. They are available as regular factory
options for the entire range of Series X Maritime Multi Displays, Maritime Multi Computers and as well
as the latest Maritime Stand-Alone computers.
In addition, the module concept has been taken further to a self contained and encased external USB
module version. This provides flexibility for new installations and easy upgrade of already installed
systems. In fact, any Hatteland Display product that has a USB2.0 port can take advantage of these
External Modules for both legacy, obsoleted, current and future products as long as the software
and firmware supports the Operating System. (note: CAN module is only supported for Series X and
newer computers).
Fully compatible with all Hatteland Display latest generation products, external cased modules enable
system integrators to benefit from the features of these internal options as an external and easy to
connect solution. They interface via a standard USB Type A Cable and the chassis comes with its own
mounting hinges. In addition a neat mounting bracket is available to secure the casing on the back of
a Series X Panel PC product matching our VESA mounting holes of 75mm (8 and 13 inch) or 280mm
(12, 15, 17, 19, 24 and 26 inch) models.
External Module USB (CAN/NMEA COM/COM/DIO)
Manufacturer: Hatteland Display AS
Product: External Module USB (CAN/NMEA COM/COM/DIO)
Typenumber: Based on internal modules, see table on page 2
Last Revised: 12 Jun 2013
Revision#: 02
Description:
FRONT VIEW
SIDE VIEW
BACK VIEW
BOTTOM VIEW
DIMETRIC VIEW FRONT
DIMETRIC VIEW BACK