Hatteland HD 12T21 STD-xxx-Fxxx, User Manual

Page: 6 / 90

6
IND100131-25
Contents of package
Item Description Illustration
FS-CABLE EU
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
EUR TYPE F
IEC
80099
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
US TYPE B
IEC
MEDIA STD01
Documentation and Driver DVD for factory installed components like mainboard, IDE, network
etc. It also includes the Touch Screen driver for units delivered with a factory mounted touch
screen. For most recent drivers, please visit “www.hatteland-display.com/archive”.
Note: To use this DVD disc you will need an external USB CD/DVD drive or provide means of
getting contents copied over via USB memory stick/network to MMC unit. In some cases (due
to revisions) a provisonal CD (PRO02-xxx) may be delivered with the unit instead.
Menu browser for
Microsoft®
Windows®
Operating Systems
Recovery Image
(located on hidden partition on SSD)
Note: Only applicable for factory delivered units with SSD hardware.
Test Report
HD CMB SX1-A1
Model dependent:
4 pcs of Key Hole Mounting Brackets for Console/Panel Mounting,
Anodized Aluminium/Stainless Steel. Suitable for panel thickness 3.0mm to 10.0mm.
This bracket kit is suitable for 12, 15, 17 and 19 inch units.
HD CMB SX1-B1 or
HD CMB SX1-C1
Model dependent:
Bracket Kit suitable for console/panel mounting which contains:
3 x Mounting Bracket for top, left and right side
1 x Mounting Bracket for bottom side (terminal/connector plate area)
8 x M5x16 screws
8 x C-Washers
HD CMB SX1-B1 = Suitable only for 24 inch units.
HD CMB SX1-C1 = Suitable only for 26 inch units.
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
1 x 2-pin Terminal Block 5.08 (Phoenix 1805301) for DC Power In
Refer to “Configuring Housing / Terminal Block Connector” section for usage.
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Item Description Illustration
Terminal Block Connector Kit
Depending on factory mounted options, Terminal Bracket Connector kit as follows:
4 x 5-pin Terminal Block 3.81 (Phoenix 1827732) for RS-422 / RS-485 NMEA COM (PCA100293-1)
4 x 4-pin Terminal Block 3.81 (Weidmüller 1792970000) for CAN Interface (HT 00254 OPT-A1)
4 x 4-pin Terminal Block 3.81 (Phoenix 1827732) for Digital Input/Output (HT 00268 OPT-A1)
Note: Location of module(s) may
differ between unit sizes
Package may also include: (based on accessories/options ordered)