Hatteland HD 12T21 STD-xxx-Fxxx, User Manual

Page: 52 / 90

52
IND100129-133
All specifications are subject to change without prior notice!
Specifications - JH C01MF A-A
1/2
This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG  le.
DATA SHEET
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
USB Cable
Manufacturer: Hatteland Display AS
Product: USB Cable 1m
Type:
JH C01MF A-A
Last Revised: 30 Nov 2011
Revision#: 01
USB Cable (Type A plug to Chassis mount Type A receptacle) suitable for installations that feature a secure fastening connection from
external equipment with standard Type A ports to all Hatteland Display computers and panel computers with standard USB Type A
ports. RoHS Compliance.
Description:
Specifications
• Waterproof Rate : IP67
• Recommended Panel Thickness : 0.8 to 6.0 mm
• Recommended Torque
: 6~7 Kgf-cm
• Mating Cap P/N : GT1C533122
• Over Mold : Black color PVC
• USB Type A Plug : Thermal plastic, black color housing
: Copper Alloy contacts with AU Plated  nish
: Cold Roll Steel shell with NI Plated  nish
• Cable : 1m, UL2725 1P x 28AWG + 2C x 24AWG+Al/My+D+B, 5.0mm thickness, black color
• Shrink Tube : L=10mm, Black color
• Receptacle Connector : USB-A Plastic C3 Panel Jack screw with pig tail
• Type Approval / Testing : Not tested, IEC60945 and IACS E10 pending
ACCESSORY
FRONT VIEW
PANEL CUT OUT
SIDE / TOP VIEW
WIRING DIAGRAM
FRONT VIEW