Hatteland HD 12T21 STD-xxx-Fxxx, User Manual

Page: 50 / 90

Specifications - Isolated Digital Input/Output Module
HT 00268 OPT-A1
50
IND100129-169
All specifications are subject to change without prior notice!
2/2
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
Supported Operating Systems (OS)
Embedded Enterprise (WEE):
- Microsoft® Windows® XP Professional (Eng, SP3, SP2c)
- Microsoft® Windows® Server 2003/2008/2008R2 (Eng)
- Microsoft® Windows® 2003/2008/2008R2 (Eng)
- Microsoft® Windows® 7 Professional/Ultimate (Eng, SP1).
Linux:
- openSUSE® 11.4, Fedora™ 15
- Ubuntu® 10.04 LTS
- Ubuntu® 12.04 LTS
Currently supported D2XX Drivers
Processor Architecture
Operating System (OS) Release Date (yyyy-mm-dd) x86 (32-bit) x64 (64-bit) Comments [Footnote]
Microsoft® Windows®* 2013-02-20 2.08.28 2.08.28
2.08.28 WHQL Certified [*1]
Release Notes [*2]
Linux 2012-06-29 1.1.12 1.1.12 [*3]
*includes the following versions of the Microsoft® Windows® operating systems:
Windows® XP, Windows® Server 2003, Windows® Vista, Windows® Server 2008, Windows® 7, Windows® Server 2008 R2 and Windows® 8.
For updated progress, please visit: http://www.ftdichip.com/Drivers/D2XX.htm
Footnotes:
[*1] = http://www.ftdichip.com/Drivers/CDM/CDM20828_Setup.exe
[*2] = http://www.ftdichip.com/Drivers/CDM/CDM 2 08 28 Release Info.rtf
[*3] = http://www.ftdichip.com/Drivers/D2XX/Linux/ReadMe-linux.txt
Additional
• Cable connector 4 x Phoenix 1827732 (MC 1,5/ 5-STF-3,81) Terminal Block 3.81 (see illustration below)
• Test and certi cate Hatteland Display standard, (tested / type approved by the following classification societies):
IEC 60945 4th (EN 60945:2002)*, IACS E10* , ClassNK - Nippon Kaiji Kyokai*,
GL - Germanischer Lloyd*, DNV - Det Norske Veritas*, ABS - American Bureau of Shipping*,
CCS - China Classification Society*, BV - Bureau Veritas*,
LRS - Lloyd’s Register of Shipping*
*=pending
• Safety IEC60950 The DIO module is intended to be used in control circuits and this module does therefore need external
fuse to meet safety agency approvals.
Illustration and Pinning
Note: Product below for illustration only. Location of module and product size/design may differ. Connector/pinning/specifications remain the same.
5-pin Terminal Block 3.81
Module A Module B
Module A Module B
A1 External Power + A1 IN+[0]
A2 N/C (Not Connected) A2 IN-[0]
B1 External Power - (GND1) B1 IN+[1]
B2 N/C (Not Connected) B2 IN-[1]
O1 HS[0] O1 N/C
C1 HS[1] C1 IN+[2]
C2 N/C (Not Connected) C2 IN-[2]
D1 HS[2] D1 IN+[3]
D2 N/C (Not Connected) D2 IN-[3]
O2 HS[3] O2 N/C