Form No. UGMW1M-0307
2
IMPORTANT SAFETY INFORMATION
MODEL DESCRIPTION
ULTRA-GLO™ MODELS
Hatco Ultra-Glo Merchandising Warmer is
constructed of an aluminum powder-coated exterior.
The unit features a main On/Off lighted rocker
switch and comes equipped with a 6' (1829 mm)
cord and plug set. The thermostatically- controlled
heated base is factory set and the temperature is
digitally displayed on the temperature indicator. The
upper ceramic heating elements are controlled by a
separate infinite switch creating ideal heat patterns.
Easy to install breath protectors and incandescent
display lights enhance and protect the warming
area. All the features of the Merchandising Warmer
contribute to an ideal food holding area.
Figure 1. UGMW-1 Model With Optional 4-Row
Riser Trivet With Front
NOTICE
Use only non-abrasive cleaners. Abrasive
cleaners could scratch the finish of your unit,
marring its appearance and making it
susceptible to dirt accumulation.
Damage to countertop material such as Corian
®
and similar products caused by heat generated
from Hatco equipment is not covered under the
Hatco warranty. Contact the manufacturer of the
base material for application information.
Do not lay unit on the side with the control panel
or damage to unit could occur.
Do not drag or slide the unit when moving or
installing. Carefully lift the unit to prevent the
legs from being damaged.
Wipe off breath protectors using a soft, clean
and damp cloth. Do not use glass cleaner and/or
paper towel. Glass cleaner may scratch the
surfaces.