Form No. TF1946M-1004
7
PROGRAMMING THE UNIT
GENERAL
Thermo-Finisher
™
units have both an upper and
lower heating zone. The upper elements heat the
product on the plate and the lower elements heat
the center of the plate.
Five adjustable program button selections allow the
operator to fine tune the radiant heat input and
heating time for a variety of menu items. This
adjustable feature assures optimum serving
temperatures without effecting quality.
Thermo-Finisher units also feature an adjustable
“Idle” mode and adjustable “Auto-Off” mode, which
allow for additional flexibility.
NOTE: After reading and understanding how to
program the unit, see
PROGRAMMING HINTS
and
RECOMMENDED FOOD FINISHING GUIDE
in this
manual for further helpful information.
NOTE: If at anytime during the programming or
operation of the unit the display is not reading
correctly or the unit is unable to be programmed,
turn the unit off. Next, turn the unit back on and
restart.
Figure 6. Control Panel
Power
ON/OFF
Switch
Lower
Heat
Indicator
Upper
Heat
Indicator
UP Button
DOWN Button
Digital Display
Enter Button
Program
Indicator
Lamp
Program
Selection
Buttons