10
Form No. KCME1M-0519
English
TROUBLESHOOTING GUIDE
Symptom
Probable Cause
Corrective Action
Unit turned “On”, but no heat.
Heating element(s) defective.
Contact Authorized Service Agent or Hatco for assistance.
Temperature Control defective.
Unit not hot enough.
Temperature Control setting too low.
Turn Temperature Control clockwise to increase the
temperature setting.
Heating element(s) defective.
Contact Authorized Service Agent or Hatco for assistance.
Unit not working at all.
Unit not turned on.
Reviewing “Operating the Unit” in the OPERATION section
of this manual.
Unit not plugged in.
Plug unit into proper power supply.
Circuit breaker tripped.
Reset circuit breaker. If circuit breaker continues to trip,
contact an Authorized Service Agent or Hatco for assistance.
Temperature Control defective.
Contact Authorized Service Agent or Hatco for assistance.
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
WARNING
ELECTRIC SHOCK HAZARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco for
assistance. To locate the nearest Service Agency, log onto the Hatco website at
www.hatcocorp.com,
select the
Support
pull-
down menu, and click on “Find A Service Agent”; or contact the
Hatco Parts and Service Team
at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: [email protected]
OPTIONS AND ACCESSORIES
General
The following accessories are availbale for Crepe Makers.
FLATSPREADER
.......Flat spreader
RNDSPREADER
........Round, steel spreader
13.75SPATULA
..........
13-3/4″ (350 mm) metal spatula with
plastic handle
CLEANPAD
................Cleaning pad with replaceable cleaning
wipes
15PADREFILL
............Cleaning wipes refill, 15 wipes
ABRSTONE
...............Abrasive cleaning stone
