Hasselblad H2 User Manual Download

Page: 76 / 91

1) Activate the camera and press the

FLASH

button once.

2) Turn the front control wheel to set the amount of compensation

required:

• from +3EV through -3EV (amount dependent on ISO setting)
• press

Clr

(

button) to clear the setting quickly if required.

3) Turn the rear control wheel to set:
•

normal sync

(ﬂash triggered just after the shutter opens)

•

rear sync

(ﬂash triggered just before the shutter closes)

•

ﬂash measure

(with non-TTL ﬂash units or TTL units in

Manual mode)

4) The grip LCD shows the ﬂash mode - Normal or Rear - in the

standard display.

5) When set to Flash Measure, a speciﬁc screen requests you to press

the AE-L button in order to make a reading. See below for details.

Integral ﬂash

The integral ﬂash unit features the following speciﬁcations:

Guide no.

Coverage

56º horizontal, 44º vertical

Maximum light fall-oﬀ at side centres - 1EV (50%)
Colour temperature (full ﬂash)

5,000 – 5,600º K

To raise the ﬂash unit into its operative position, slide the ﬂash-unit

catch backwards in the direction of the ﬂash symbol. To return

the ﬂash unit into its closed position, push down on the top of the

unit until it clicks back into place. The ﬂash unit is automatically

activated when it is in the operative position and de-activated

when returned to its stored position.
The green LED ﬂash symbol blinks in the viewﬁnder when the

ﬂash unit is charging and remains stationary when fully charged.

The ﬂash output can also be adjusted for optimum light balance

in ﬁll-ﬂash situations.



Do not use the integral ﬂash together when another external TTL

ﬂash unit is connected (and used in TTL or A mode)



For full coverage with the integral ﬂash, use 80 mm or longer lenses

(without a lens shade).

Using the integral ﬂash:

1) Slide the ﬂash-unit catch backwards in the direction of the ﬂash

symbol.

2) Press the

FLASH

button.

3) Choose between

Normal

Rear

sync by turning the rear

control wheel and the amount of compensation (if required)
by turning the front control wheel.

4) Press

Save

(

Drive

) button. Make an exposure.

5) If the settings were incorrect to match the output of the ﬂash

unit, the viewﬁnder LCD displays a red triangle alongside a
ﬂashing green ‘ﬂash’ symbol plus a warning message - ‘

Low

ﬂash

’. The grip LCD will also display a warning message -

‘

Low ﬂash

’.

Conventional measures should then be taken to correct the situ-

ation. (That is: move closer to the main subject, use a larger aper-
ture setting or use a faster ﬁlm / higher ISO setting).

�

��

FLASH

Example of viewﬁnder LCD display
showing Flash set to Rear sync as well
as ´- 1EV´ exposure compensation.

�

��

FLASH

��

�

Red warning triangle and green LED ﬂash
symbol to left of viewﬁnder LCD display.

Summary of Contents for H2




























































































Search results

Summary of Contents for H2

Reviews:

Related manuals for H2

Brands by name

Popular brands

Hasselblad H2, User Manual

Search results

Summary of Contents for H2

Reviews:

Related manuals for H2

Brands by name

Popular brands