Hasselblad H2 User Manual Download

Page: 68 / 91

Customizable button function list

The

USER, AE-L,

STOP DOWN

and

M.UP

buttons can all be

reassigned to diﬀerent functions.
The

USER

button has no function until speciﬁcally assigned one

(default is ‘None’).
The

AE-L,

STOP DOWN

and

M.UP

buttons, however, by default

are assigned the function appropriate to the name, until assigned

otherwise.

The following is a description of the functions that these buttons

can be assigned / reassigned to.

None

The user button has no function.

Standby

Sets the camera in standby mode to save battery consumption.

Stop down

Stops the lens down.

Flash Measure

Initiates ﬂash measure function.

Interval timer

Initiates interval timer function.

Multi exposure

Initiates multi exposure function.

Self timer

Initiates self timer function.

Bracketing

Initiates bracketing function.

AF Drive

Activates the

system in any focusing mode. When the button is

pressed the

system sets the correct focusing point automatically.

This is a rapid, accurate and handy way of using the

system when

the camera is set to

Manual

focus mode. In this manner you take

advantage of the accuracy and certainty of the autofocus system

while retaining the control inherent in manual focusing mode.

Mirror up

Controls the mirror up or down function (same function as the

M-UP button).

B mode

Sets the camera to

exposure mode.

T mode

Sets the camera to

exposure mode.

Cycle LM mode

Changes the light-metering method in a loop manner: Centre

Weighted/Average/Spot.

plus the following that are only available when a digital back is
attached:

Histogram

Recalls the last shown histogram. (Not supported by all digital

backs).

Grey balance exp.

Initiates a grey balance exposure. (Not supported by all digital

backs).

Delete last image

Activate the delete function for the last image in a digital back. (Not

supported by all digital backs).

Dig. foc check

Displays last exposure taken at 100% scale on digital backs with

LCD. (Not supported by all digital backs).

A quick way to program the customizable buttons (and to access the
Custom Option level in general) is to use the short-cut as follows:

1) Press the

button.

2) Then press the

USER

button.

This directly accesses the “

Custom options

” level in the menu and

the “

User button function”

item.

Summary of Contents for H2




























































































Search results

Summary of Contents for H2

Reviews:

Related manuals for H2

Brands by name

Popular brands

Hasselblad H2, User Manual

Search results

Summary of Contents for H2

Reviews:

Related manuals for H2

Brands by name

Popular brands