HARVEY C-18VS, Instruction Manual

Page: 3 / 24

2
Safety Rules
LARGE ELECTRIC TOOLS SAFETY
1. Know your band saw
Get up manual instruction for machine maintenance manual in all points before starting any
maintenance work.
2. Ground connection
This machine with grounding plug ,must ensure that ground .Green or green rolling line of yellow
color for the grounding line , can never make a mistake .
3. Use the shied
4. Remove the wrench
Form a good habit: to ensure adjustment tools , such as start-up go forward all the wrench .
5. Keep the working area clean
In a timely manner to clean the ground to ensure that the ground is not wet.
6. To avoid dangerous working environment
Can't use machine in damp environment, also cannot expose machine in the rain.
7. Stay away from the children
All bystanders should keep a safe distance. With the working area.
8. Children shall be prohibited from entering the preparation
9. Use appropriate machine speed
10. Use the right tools
11. Wear suitable work
Can't through greater than loose clothing, gloves, tie or wearing jewelry.
12. Always wear protective glasses
13. Don't get too close to the workspace
14. Careful maintenance machine
Always keep the machine clean, in order to assure the best the best performance, in a timely
manner in accordance with the specifications and lubrication and replace the attachment.
15. Deenergization
Before maintenance, should ensure that power off.
16. To avoid accidental activation
Before access to the power supply, do not contact switch.
17. Use the specified in the attachment
18. Never stand on the machine
19. Regularly check damaged parts
20. Never leave the machine before machine did not stop completely
Woodworking band saw machine safety
1. Before removing the desktop batten, always ensure the stop of the saw blade.
2. Always make sure that the hands and fingers away from the blade.
3. Ban try sawing logs directly, because there is no a flat base surface logs, if use the appropriate
support device can be.
4. Always firmly grip the wood and then feed close to the saw blade at uniform speed.
5. If, after cutting blade is still in the wood, should first turn off the power.
6. Adjustment on saw card distance by cutting material about 1/8 ".