HARVEST H1392, Assembly Manual

Page: 33 / 66

33
3) and place it so that the bolt brackets is to the inside of the axle bracket (FIG 23-3) should fit like (FIG 24-4)
4) Using (4) 5/8" x 1 1/2" Flange bolt and flange nuts, bolt carriage arm to axle bracket Follow these same
steps for the left carriage arm Do not tighten bolts at this time. Carriage arms should now be attached to
the axle(FIG 24-5)
FIG 24- 5
5) Locate the cross tube for lower cylinder, Place it on the floor between the carriage arms with the hydraulic
cylinder holes facing the axle (FIG 24-6)
6) Pace the hydraulic cylinder bracket 2/3 away from the axle.
FIG 24- 6
7) Locate the left scissor arm (it has a lower truss welded to it FIG 24-7) make sure bracket is facing inwards
when setting scissor arm down
Bolt brackets inside
Cross tube for lower cylinders
FIG 24- 4
FIG 24- 3