![background image](http://html1.mh-extra.com/html/harvest-tec/491bb/491bb_installation-manual_2103714005.webp)
5
Installation of Applicator
1
. Removal of tank straps and tank
1. Remove the two tank straps (001-
6707P) by removing all eight 3/8” hex nuts. Figure 1
2. Lift the tank (005-9218) away from the saddle (001-6707N) and place the tank on a smooth flat surface.
3. Install the pump supply elbow (003-EL3412) on the bottom of the tank. Figure 1
4. Install the drain/fill elbow (003-EL3434) on the side of the tank below the sight gauge.
001-6707P
001-6707P
003-EL3412
Figure 1
001-6707ML
001-6707MR
001-6707N
001-6707HR
001-6707Q
Summary of Contents for 491BB
Page 2: ...2 Intentionally blank...
Page 16: ...16 NOTES...
Page 17: ...17 NOTES...
Page 18: ...18 NOTES...