![background image](http://html1.mh-extra.com/html/harvest-tec/491bb/491bb_installation-manual_2103714010.webp)
10
5. Installation of gauge and hose
1. Locate parts bag 13.
2. Place the gauge on the upper right corner of the baler, a place that is visible form the seat of the tractor.
3. Next, run the hose from the pump outlet to the hose fitting on the gauge. Then cut the hose to length.
Place hose clamps on hose ends.
4. Connect the quick connection from your parts bag to the other end of the gauge.
5. Run hose from that fitting to the spray shield. Then cut the hose to length.
6. Installation of the drain fill line
1. Locate parts bag 1.
2.
Thread 3/4” elbow fitting into end of tank.
3. Run hose from the elbow down the frame to the bottom of the baler.
4.
Drill 1/4” holes to accept the valve holder bracket and use 5/16” x 1” self-tapping screws.
5. Connect valve assembly to other end of hose. Place hose clamps on both ends.
6. Secure hose to frame using cable locks.
Summary of Contents for 491BB
Page 2: ...2 Intentionally blank...
Page 16: ...16 NOTES...
Page 17: ...17 NOTES...
Page 18: ...18 NOTES...