![background image](http://html1.mh-extra.com/html/harvest-tec/491bb/491bb_installation-manual_2103714006.webp)
6
2. Installation of saddle legs and saddle
1. Locate parts bag 5.
2. Install the two saddle legs (001-6707MR & 001-6707ML) on to the top of the baler chute as shown.
Figure 2
3.
Secure the two legs with six (three per side) 1/2” x 1-3/4” carriage bolts, flats washers, locks washers,
and hex nuts. The six holes will be already punched out of the baler frame and will line up with the
saddle legs. Make sure the bolt head is in the chamber.
4. Install the tank saddle (001-6707N) on top of the saddle legs. Figure 3
5. Secure the tank saddle to the saddle legs using eight (four per side) 1/2" x 1-
3/4” carriage bolts, flat
washers, lock washers, and hex nuts. Use the outside set of holes for four foot wide balers and the
inside set of holes for three foot wide balers. Figure 3
6. Make sure the carriage bolt heads are on top of the saddle and the bolt points towards the bale
chamber.
7. Install the tank and secure with the straps and hardware removed from before. The tank straps will
need to be secured with a double nut.
001-6707MR
001-6707ML
Figure 2
Figure 3
Summary of Contents for 491BB
Page 2: ...2 Intentionally blank...
Page 16: ...16 NOTES...
Page 17: ...17 NOTES...
Page 18: ...18 NOTES...