15
4.2 The AgilePulse Waveform
Generator (cont’d)
4.2.1 Front Panel
The following can be found on the front panel: the Mains/Line
power switch (illuminated when on), the Emergency Stop button
switch, two USB ports, the ID Electrode Connector, and the User
Touch Screen (Figure 4-2).
One USB port can be used for a Memory Key. The data logs that
result from a vaccination are automatically stored on the Key if
one is inserted. The other USB port may be used for the optional
Foot Pedal (Appendix C, Tab 9).
The Emergency Stop button switch is used to stop system
operation. This switch immediately stops all pulsing and turns
off the high voltage power supply. The Line/Mains power switch
should never be used to turn off the system in an emergency
situation if pulsing is in progress.
4.2.2 Back Panel
On the back panel there is an IEC Power Entry module and
provisions for an Ethernet port.
Ethernet connectivity is not currently available.
4.3 Intradermal ARRAY Electrode (IDA)
The IDA consists of two parts: the handle and the tip. The handle
is connected to the waveform generator. The tip contains needle
electrodes used to deliver the DNA vaccine into the target cells.
The needle arrays are disposable, but can be used for multiple
experiments provided proper cleaning, and care of electrodes,
are followed, and sterilized.
Available needle configurations are described in Appendix A.
Figure 4-2: AgilePulse Front Panel
AgilePulse
™
System Components & Set-Up
4
