2. Setup & Installation
2.1 Box Contents
Before setting up your HPC401 Plus, please verify that all box contents are included. The HPC401
Plus box contents can be seen below in Figure 1.
1.
Palm PDA
- The included Palm is pre loaded with the HPC Suite of software. The battery of
the Palm may require charging. Please read the Palm documentation before using.
2.
HPC401 Plus Interface
- The HPC401 Plus hardware interface attaches to the bottom of the
Palm and connects to the HART network. See the following section on how to correctly use
this interface.
3.
Product Documentation & Software
- Contains the Smar documentation and software. Note:
The HPC401 Suite of software is already pre-loaded onto the Palm PDA.
4.
Power Supply
- Connects to the Palm or the HPC401 Plus HART interface to recharge the
Palm.
5.
Palm USB Hotsync Cable
- Connects the Palm to your PC to Hotsync via USB.
Figure 1 - HPC401 Box Contents
Page 5
