12/24/07
888-2685-001
3-25
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation and Adjustments
Ranger Commissioning Manual
3.9.2
System Log
This screen is accessed by pressing the System Log button on the System screen in
Figure 3-18. It is a complete listing of all transmitter and system faults in the order in
which they occurred. It can hold up to 99 faults. Active Faults will be highlighted and
cannot be reset. All other faults will be cleared when the RESET button is pressed.
Figure 3-20 shows that only faults #7 and #8 are active (at least on this screen), all other
faults are inactive. Use the Next and Previous buttons to view the entire list.
This should be thought of as a record of the faults which have occurred or as a summary
point of all transmitter faults. Individual faults may be investigated by pressing any of
the 5 hardware buttons to the right of the GUI display and then if necessary pressing
any highlighted buttons on the GUI to go deeper into the system.
The faults which show up on any particular screen are discussed with that screen image
in this section.
Figure 3-20 System Log Screen
To Figure 3-18
Note:
Date format is
DD/MM/YY
Summary of Contents for CZ1000F
