5-2
888-2685-001
12/24/07
WARNING: Disconnect primary power prior to servicing.
Ranger Commissioning Manual
Section 5 Replacement Procedures
To install the Air Block, place the right side into the slot as shown in Figure 5-2. To
finish, squeeze near the back until it starts into the slot on the left. Now using either
your hands or a screwdriver, work it into the slot from back to front. It could also be
installed starting at the front and working your way to the back, whichever works best
for you. When finished, both sides of the Air Block should be captive under the shelf.
NOTE:
If you use a tool to aid installation, be very careful not to bend the aluminum
guide to the left of the slot.
Figure 5-2 Air Block Installed
NOTE:
The peelable label was left on
the lexan so that the pictures
would show up better. The label
should be peeled off before use.
Note: The slot is installed around
the aluminum bracket.
Summary of Contents for CZ1000F
