- 13 -
V1-02-06
Assembly instructions pivot arm awnings US701 - US702 - US715
Connection and installation of the motor
Discreetly lead the motor cable to the switch. Connect the motor cable and the net wires to the single-
pole switch (see above). If necessary change the brown and the black wire according to the direction of
the arrows of the switch. If two or more motors have to be installed on one switch, you have to use one
or more relay boxes. For the connection of these see diagram RI2
Remark concerning the motor
If the motor is a standard type LT- or SLT- motor, you may proceed with this manual.
If the motor is an Orea RTS type or an Altus RTS type, please consult the fitting manual of these very
types.
