InstallatIon and operatIon Manual for WInd and sun screen sl400
09/12
|
12
8. TroublesHooTInG
nature of tHe fauLt
cauSe
SoLutIon
pull rod does not fit tightly
against the box in the
closed position.
the fabric does not roll up
evenly.
pull out the pull rod to fully
extend the fabric and then
roll it up again.
Keep more tension on the
pull rod and fabric whilst
extending it and rolling it
up.
the wheel no longer turns
freely, making it necessary
to hold the pull rod higher
above the ground whilst
rolling up the screen.
fabric does not roll up
evenly or one end is rolled
loosely.
the height of the handgrip
is incorrect.
adjust the position of the
handgrip.
the height of the housing
is incorrect.
Slightly adjust the height of
the assembly brackets for
the box.
9. General Info on fabrICs
the fabric collection consists of acrylic fabrics and the Soltis range (86, 92 or 96), which
can be selected from the collection folders.
the same fabric may have a different surface and slight variations in colour or design cannot
be completely eliminated.
when working with a much larger drop, rows of fabric are needed and consequently creasing
may occur. there is also a greater risk of the fabric becoming slack because of the weight
of the fabric, however, this will not affect the functioning of the screen in any way.
where the fabric is attached to the fabric roll, stripes may appear for each rotation around
the roll.
the above-mentioned cases are not errors, but phenomena which are the result of technical
factors. these can never give rise to complaints, or be a reason for demanding another
fabric or for obtaining a discount!
