InstallatIon and operatIon Manual for WInd and sun screen sl400
09/12
|
11
7.3. Terms of use
•
the SL400 serves mainly as a protection against wind and sun or for additional
privacy. It must never be used for all-weather-protection.
•
the sun screen should never be exposed to wind loads that are greater than 27
km/h or greater than 20 km/h if a ground anchor is being used. also the fastening
materials used for the mounting surface play an important part. the manufacturer
accepts no responsibility for damage caused by excessive wind.
•
never unroll the screen in rain, snow or freezing weather conditions. this may cause
damage.
•
If the fabric of the wind and sun screen becomes damp or wet, then it must be dried
as quickly as possible while unrolled. otherwise there is a risk of stains and mould
appearing or damage to the fabric or the seams.
•
the screen must be rolled up during the night and when no one is present.
•
always avoid any accidental loads on the SL400. this can lead to damage or
defects.
•
a screen that is not in perfect condition must be repaired immediately.
•
only oeM replacement parts may be used for repairs.
•
the manufacturer is not responsible for damage resulting from improper use.
7.4. Maintenance
to guarantee trouble-free use of the SL400 it is prudent to regularly maintain and inspect
the screen, at least once a year. check for signs of wear or damage to the fabric or frame.
In the case of wear or damage, your installer is the designated person to carry out these
repairs.
You can carry out small maintenance and inspection jobs as described below. never use
a high-pressure cleaner!
Maintaining the fabric:
•
the screen fabric has been treated with a special dirt-repellent product, which slows
down the process of dirt build-up.
•
use a soft brush to clean dust from the dry sun screen fabric.
•
for watery stains first moisten the fabric and then rub with a clean cloth. only use
detergents such as soap or other chemical products in very exceptional situations.
•
for finger or oil stains, use a clean cloth with a drop of soft neutral washing-up liquid
and subsequently use plenty of water to rinse. always avoid using trichloretane.
•
after cleaning the fabric always allow it to dry thoroughly.
Maintaining the frame:
•
the supporting system, the pull rod and the external box must be cleaned regularly
with tepid water and a neutral soap such as car shampoo, and rinsed thoroughly with
tap water (at least 2x a year).
•
It is emphatically not recommended to use corrosive or aggressive products,
scouring pads or other abrasives.
