38
INSTALLATION (Options)
Only For Qualified Installers
Speed Control
Knob
Blower Assembly Ready to Install.
Blower Assembly Installed.
Under Floor View
8. Install register by sliding it down into the
opening. Make sure the speed control door
is over the speed control. The register is
designed to allow for a variation in floor
thickness.
9. Turn on electrical power and test.
Operation:
Note: A temperature switch on the
fireplace will not allow the register blower
to start if the fireplace is not warm enough
to blow hot air. This same switch will turn
the blower off, if the fireplace is turned
off and cools.
1. Open the speed control door and turn the
blower on to the desired speed. Turning
the blower on, opens the damper in the top
of the fireplace and allows hot air to flow.
2. Close the speed control door.
Summary of Contents for The Serenity III HB 38 DV
Page 27: ...VENTING Only For Qualified Installers 27...
Page 54: ......
