Compact Stagebox
12
Document generated: 12.02.13
SW V4.1
Remove the blank panels and insert the MADI card. After powering the
console up again and starting the Vista application, the recessed
RECONFIG
button must be pressed.
A message window may appear in the Vista application. Click on the
Ok
button and wait for a couple of seconds until a new message window
I/O
Hardware change detected – Wait for default I/O setup to reappear?
appears. There are three option buttons:
Ok, Use for this session only
, and
Store as new default
. Click on
Store as new default
. Again, after waiting
for a few seconds the Surveyor icon will become green and the added card
will be visible in the Surveyor details. The MADI card is now ready to be
used.
Once the local MADI card has been added to the desk as explained above,
it will be displayed in the console’s Surveyor window. After connecting and
powering up the Stagebox, it will automatically appear in the Surveyor as an
additional I/O entity named
Remotebox
.
Should yellow triangles appear in the dialog above, re-start the Vista applica-
tion on the console.