Compact Stagebox
11
Document generated: 12.02.13
SW V4.1
3.2
Compact Stagebox and Studer Vista 1
Studer Vista 1 Console
with optional MADI card in the D21m extension slot
Optical or RJ45 Cables
depending on MADI card type
Mains In 1
Mains In 2
Mains In 2
Mains In 1
Compact Stage Box
Switch set to MAIN or AUX if using one
cable, to RED if using 2 cables.
Note
The Studer Vista 1 console needs a D21m MADI card installed for connecting
to the Compact Stagebox. The integrated optical MADI interface
cannot
be
used for this connection since it offers no support for the MADI-embedded
input control signals. It is intended as a recording interface only.
3.2.1
Vista 1 Setup
The number of input and output ports on Vista 1 is defined in the DSP ses-
sion configuration. The Vista 1 comes with several factory-set configuration
templates with a default of 32 input ports and 16 output ports for the D21m
card slots. These I/O port configurations are optimized for the use with a
MADI I/O card to connect to the Studer Compact Stagebox.
The Compact Stagebox I/O ports have the following device labels predefined:
Input ports
Stagebox 1 - Stagebox 32
Output ports
Stage Out 1 - Stage Out 16
Before inserting the MADI I/O card into your Vista 1, remember to power
the console down and unplug it from the AC supply.
Note:
The DIP switches of the MADI card must be set to match the actual number
of channels provided from and to the Stagebox. For details, please refer to
the ‘D21m I/O System Operating Instructions’ document, available either
from www.studer.ch in the ‘Downloads’ - ‘User Guides’ - ‘Studer D21m I/O
System’ area, or on the product disc (CD or DVD) shipped with your console.
