background image

Oakleaf Woodburning Stove

Dry Seasoned Wood Only!

Harman®  •  Oakleaf Owner's Manual_R23  •  2010 -___  •  09/15

2

3-90-798

Hearth & Home Technologies welcomes you to our tradition of excellence! By choosing a Harman appliance, you have become 

part of our commitment to meeting the heating needs of consumers with the most distinctive, powerful and responsible home 

heating products available. 
The Oakleaf has huge features in an elegantly small package, The Oakleaf takes advantage of Harman’s 30+ years of stove 

design, technology and manufacturing. The Firedome secondary combustion system provides for super-clean burning and 

minimal maintenance. The top-loading feature makes for more convenient loading, with enough fuel for an all day burn.
We wish you and your family many years of enjoyment in the warmth and comfort of your hearth appliance.
Thank you for choosing Harman.

This Label is located on the rear of the appliance. It contains important safety test information as well as the clearances to 

combustible materials. The label also contains the appliance serial number. For your records, copy your serial number and 

purchase date here.

Serial #: ________________________  

 

Date of Purchase: ________________________

Approved For Use in Mobile/Manufactured Homes (UM) 84-HUD - 

USA ONLY

“PREVENT HOUSE FIRES” 

Install and use only in accordance with manufacturer’s installation 

and operation instructions and local codes. In absence of local codes, installation must meet 

minimum requirements of NFPA 211 in USA. Refer to manufacturer’s instructions and local codes for 

precautions required for passing chimney through a combustible wall or ceiling.

This wood heater needs periodic inspection and repair for proper operation. Consult the owner’s 

manual for further information. It is against federal regulations to operate this wood heater in a manner 

inconsistent with the operating instructions in the owner’s manual.

WARNING: FOR MANUFACTURED HOMES:

 (US Only) Do not install appliance in a sleeping room. 

An outside air inlet must be provided. The structural integrity of the manufactured home’s floor, walls, 

and ceiling must be maintained.

Flue connector pipe must be 6” diameter, minimum 24 MSG blue steel. Chimney must be factory built 

103HT or masonry construction. Contact Local Building or Fire Officials about restrictions and 

installation inspection in your area.

DO NOT CONNECT THIS APPLIANCE TO A CHIMNEY SERVING ANOTHER APPLIANCE.

FOR USE WITH SOLID WOOD FUEL ONLY, DO NOT bURN COAL.

EPA Certified Emissions: 2.2 g/hr

Fuel Type: 

Cord Wood

DO NOT Overfire - If Heater or chimney connector glows, you are overfiring.

Optional Blower Harman #1-00-797032: Electrical Rating 115 VAC, 60Hz, 1AMP Maximum 

Route power cord away from unit.

OPERATE ONLY WITH DOORS CLOSED

 

Replace glass only with 5mm ceramic, available from your dealer.

Combustible flooring must be protected with an approved 0.45R hearth board.

Appliance must be 

installed with the legs attached. Do not obstruct 

airflow  under  the 

appliance.

DANGER: Risk of Fire 

or Explosion - Do not burn garbage,  gasoline, 

drain  oil  or  other 

flammable liquids.

WARNING:  Risk  of 

Fire,  Do  not  operate  with  fuel  loading  or  ash 

removal doors open.

Do  not  store  fuel  or 

combustibles within marked clearances. Inspect 

and  clean  chimney  and  connector  regularly  -  Under  certain  conditions  of  use,  creosote 

buildup may occur rapidly.

The Bypass Damper must be opened prior to opening any load or ash door.

Do not install a grate or otherwise elevate the fire.

DO NOT REMOVE THIS LABEL / Ne pas enlever cette étiquette

352 Mountain House Road

Halifax, PA 17032

ECO: 
PARt # / REv:  3-90-797_RevD
ORiginAtOR:  Spidlet
DAtE:  04/15
LAbEL SizE:  15.5 in. x 5.875 in.
LOCAtiOn: 

CLASS: 
ADHESivE: 

468

MAtERiAL: 

MEtAL

ink: bLACk
OvERCOAt:

LAbEL tiCkEt

(4) Hole Size = .60

(1) Hole Size = .125

(1) Hole Size = .125 x .25

Corners .062

CLEARANCE TO COMbUSTIbLES

DISTANCES MINIMALES DE SECURITE:

P.N. 3-90-797

CAUTION:

 

HOT wHIle  IN  OperATION. DO  NOT  TOUCH. 

Keep CHIlDreN AND ClOTHINg AwAy. CONTACT mAy CAUse sKIN 

bUrNs. see NAmeplATe AND INsTrUCTIONs. Keep fUrNIsHINgs 

AND OTHer COmbUsTIble mATerIAls A CONsIDerAble DIsTANCe 

AwAy frOm THIs ApplIANCe.

ATTeNTION:

 

CHAUD lOrs DU fONCTIONNemeNT. Ne 

TOUCHeZ pAs l’AppAreIl.gArDeZ les eNfANTs eT les VÊTemeNTs ÉlOIgNÉs. TOUT 

CONTACT peUT eNTrAÎNer Des brÛlUres De lA peAU.  rÉfÉreZ-VOUs À lA plAQUe 

sIgNAlÉTIQUe eT AU mODe D’emplOI. gArDeZ le mObIlIer eT les AUTres mATÉrIAUX 

COmbUsTIbles bIeN À l’ÉCArT De l’AppAreIl.

A

C

D

b

Made  in  U.S.A.  of  US  and  imported  parts.  /  Fabriqué  aux  États-Unis-

d’Amérique par des pièces d’origine américaine et pièces importées.

E

F

F

E

REFER TO MANUFACTURER’S INSTRUCTIONS FOR CLEARANCES WITH 

ADDITIONAL VENT CONFIGURATIONS.

US ENVIRONMENTAL PROTECTION AGENCY

Certified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020.

Certifié conforme aux normes 2015 d’émission de particules. Non approuvé pour la vente après le 15 mai 2020.

BARCODE LABEL

008

Serial No.

N

o

 de série:

Rev D

Report #/ Raport #

135-S-26-6.2

Tested to / Testé à:

 UL1482-10, and ULC-S627-00, EPA Method 28 & 5G

Approuvé pour l'utilisation dans les maisons mobiles / Fabricant -

 USA SEULEMENT

"EMPêCHER MAISON INCENDIES"

 Installer et utiliser uniquement en conformité avec 

installation et d'utilisation les instructions du fabricant et les codes locaux. En l'absence de 

codes locaux, l'installation doit satisfaire aux exigences minimales de la norme NFPA 211 

aux Etats-Unis. Reportez-vous aux instructions du fabricant et les codes locaux pour les précautions nécessaires pour faire 

passer la cheminée à travers un mur ou un plafond combustible.

Ce  poêle  à  bois  doit  inspection  périodique  et  la  réparation  pour  un  fonctionnement  correct.  Consultez  le  manuel  du 

propriétaire pour plus d'informations. Ce est contre les règlements fédéraux pour faire fonctionner ce poêle à bois d'une 

manière incompatible avec les instructions d'utilisation dans le manuel du propriétaire.

AVERTISSEMENT: POUR maisons préfabriquées:

 (États-Unis uniquement) Ne pas installer l'appareil dans une chambre 

à coucher. Une entrée d'air extérieur doit être fournie. L'intégrité structurale du sol, les murs et le plafond de la maison 

préfabriquée doit être maintenue.

Tuyau de raccordement de fumée doit être de 6 "de diamètre, en acier au minimum 24 MSG bleu. Cheminée doit être 

construite l'usine 103HT ou la construction de maçonnerie. Contactez Immeuble Local ou fonctionnaires incendie au sujet 

des restrictions et l'inspection d'installation dans votre région.

NE PAS brancher l'appareil à une cheminée desservant un autre APPAREIL.

Pour une utilisation avec Solid combustible bois Seulement, Ne pas brûler de charbon.

Émissions certifiés EPA: 2,2 g / h

Type de carburant: Cordon bois

NE SURCHAUFFEZ - Si le connecteur chauffe ou de la cheminée rougeoie, vous surchauffez.

Facultatif Blower Harman # 1-00-797032: Note électrique 115 VAC, 60Hz, 1AMP maximum

Route cordon électrique de l'appareil.

FONCTIONNER UNIqUEMENT AVEC LES PORTES FERMÉES

Remplacer le verre seulement avec de la céramique 5mm, disponible chez votre revendeur.

Plancher combustible doit être protégé par un conseil 0.45R foyer approuvé.

L'appareil doit être installé avec les jambes attachées. Ne pas obstruer le flux d'air sous l'appareil.

DANGER: risque d'incendie ou d'explosion - Ne pas brûler de déchets, de l'essence, vidanger l'huile ou d'autres 

liquides inflammables.

AVERTISSEMENT: Risque d'incendie, ne pas fonctionner avec  chargement de combustible ou d'enlèvement de 

cendres portes ouvertes.

Ne pas stocker carburants ou de combustibles dans les dégagements marqués. Inspectez et cheminée propre et 

le connecteur régulièrement - Dans certaines conditions d'utilisation, l'accumulation de créosote peut se produire 

rapidement.

Le Bypass amortisseur doit être ouvert avant d'ouvrir ne importe quelle porte de charge ou de la cendre.

Ne pas installer une grille ou autrement surélever le feu.

MODEL / MODÈLE: “OAKLEAF” Woodburning Stove

Room Heater Solid Fuel Burning Type

SUITABLE FOR MOBILE-HOME INSTALLATION (USA ONLY)

C
D

b

A

Parallel Installation

Inches Millimeters

Back Wall / Entre mur arriereet l’appareil
Side Wall To Unit / Entre mur lateral et l’appareil

Back Wall To Flue Pipe / Entre  tuyau et le mur arriere
Side Wall To Flue Pipe / Entre tuyau et le mur lateral

14
17

17-1/2
26-3/4

330
432
444
679

Walls to Unit Body / Entre mur adjacent et l’appareil
Walls to Flue Pipe / Entre tuyau et le mur adjacent

F

E

Corner Installation

Inches Millimeters

14

21-3/4

330

552

G

G

H

J

Floor  protection  must  be  a  minimum  3/8”  (9.5mm)  of  0.84k  material,  or 

0.45R. Must also be placed under any horizontal sections of flue connector, 

extending 2” (51mm) beyond the measurement of the pipe. Use of bottom 

heat shield required on protected floor.
Pour protéger le plancher, il faut sous le poêle un matériau (9.5mm / 0.84k), 

o 0.45R. qui doit aussi être placé sous les parties horizontales du tuyau 

de raccord à la cheminée et s’étendre à 51 mm (2 po) au-delà de la mesure 

du tuyau.

Sides / Côtés
Front- from glass/Devant, par rapport au verre
Rear / Arrière

J

H

G

Floor Protection Requirements

Inches Millimeters

8

18

8

203

457

203

Date of Manufacture / Date de fabrication:

2015   2016   2017   JAN   feb   mAr   Apr   mAy   JUN   JUl   AUg   sep   OCT   NOV   DeC

Manufactured by / Fabriqué par: Hearth and Home Technologies 352 Mountain House Road, Halifax PA 17032

Summary of Contents for Oakleaf







































Reviews: