Harman AMX NMX-ENC-N2312, Instruction Manual

Page: 34 / 66

Encoder Configuration Options
N2312/N2322 User Manual 34
IR Page
Click the IR link at the top of any of the main web pages to access the page shown in Figure 28 . This page allows you to upload and
execute IR Pronto codes so that other vendor’s devices can be controlled through the Encoder’s IR connector. Commands can be
saved for future use and executed later. The
IR Code
menu lists all saved IR commands. See Table 10 for option descriptions.
FIG. 28
IR Page
TABLE 10
IR Page Options
Option Description
IR Code Create/select IR codes. Different vendors have different IR Pronto codes and can usually be found through a web
search. Copy/paste new IR commands directly into the input space.
Save button
Save the current code.
Delete button Delete the current code.
Execute button Activate the selected code through the Encoder’s IR connector.
Logs Page
Click the More link at the top of any of the main web pages and select Logs to access the page shown in Figure 29 . The Logs page
displays a command log that lists all TCP and UDP messages the unit receives. It also displays the web browser’s IP address and
gives you options to
Refresh
and
Reset Logs
. When in need of assistance from tech support, use the
Debug Log
section to capture
information useful for troubleshooting. Simply click
Start Debug Log
, wait at least one minute, and click
End Debug Log
to create
the file. You can then download and send it to tech support.
FIG. 29
Logs Page