Decoder Configuration Options
58
N2151/N2251 User Manual
KVM Page
Click the
KVM
link at the top of any of the main web pages to access the N-Series KVM page. You must check the
USB Enable
box at
the top to see the page shown in
for option descriptions.
FIG. 54
KVM Page
TABLE 29
KVM Page Options
Option
Description
USB Enable
Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Permission Level
Set the permission level for the Decoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level. See the section
Advanced KVM Setup (With Added Security Features)
page 22 for more information.
Connect to Encoder IP
Address
Enter the
IP Address
of an active Encoder. Use the
Switch
and
Disconnect
buttons to control the connection.
KVM Advanced Settings
Enable to access the KVM Encoders list.
KVM Encoders
View/edit the list of Encoders associated with this Decoder. Here you can
Add new/overwrite
Encoders to the
list by
Name
or
IP Address
as well as assign
Passwords
. You can also end the Decoder/Encoder association by
clicking the
Remove
button. Intended for use when different passwords are assigned to Encoders in your
system.
Import KVM CSV
Click the
Choose File
button and browse to the KVM CSV file on your computer that you would like to use to
configure the unit. Then click
Upload
. For more information, see the section
