Introducing Your New N2600 Series Devices
N2615-WP/N2625-WP Manual
7
Introducing Your New N2600 Series Devices
Product Overview
The N2600 AV over IP Series belongs to the N-Series product family from AMX and consists of N2612 Encoders, N2622
Decoders, N2615 Wallplate Encoders and N2625 Wallplate Decoders. This series provides a flexible, feature-rich, and simple-to-
deploy digital media distribution and switching solution that can be used in 4K applications with resolutions up to 4096x2160,
with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency over
standard gigabit Ethernet networks.
Any source can be sent to one or more displays by routing through layer-2/layer-3 switches using standard Cat5e cable. Standard
features include H264 Stream, output scaling, bi-directional serial, IR, embedded 7.1 audio, USB 2.0 and KVM-over-IP extension.
Card versions compatible with the N-Series N9206 card cage are available for high-density applications.
Features include:
Design flexibility allows you to start as small as 1x1 and grow the system in increments of single sources and devices by
simply adding additional Encoders and Decoders.
Simultaneously stream an H264 Stream from the N2612 Encoder allowing for maximum flexibility of the system.
USB 2.0 can be independently routable or follow video.
Output scaling performed at the Decoder for maximum flexibility.
Power over Ethernet (PoE) eliminates the need for a local power supply and speeds installation. Units can still be powered
locally by 12VDC. This allows easy rack-mountable, high-density installations.
Infrared (IR) emitter connection allows control of low-cost, IR-only display devices.
Fast install with Phoenix connectors for power, IR, RS232 serial, and analog audio interfaces.
Pass-through HDMI interface allows easy installation with local display, such as desktop PC applications.
USB-A and USB-C connections for KVM applications.
Hardware Overview
Refer to the following figures (front and rear panel drawings of these devices) and the
Front and Rear Panel Descriptions table
page 6 for hardware details.
1)
USB-C Port
2)
HDMI Input
3)
Device ID Discovery Button
4)
Device Reset Button
FIG. 1
N2615 Encoder Front Panel
5)
LED Status Indicators
6)
Analog Audio Input
2
1
3
4
5
6
