Encoder Configuration Options
N2615-WP/N2625-WP Manual
25
Current Source Section
The
Current Source
section of the
Home
page is shown in
FIG. 21
Current Source Section
TABLE 3
Home Page: Current Source Section
Option
Description
Notes
Preview Image
When enabled the current source will be shown in the below
image preview area.
The preview image is updated approximately
every 2 seconds.
Path MPJEG: <IP Address>/snapshot.jpg
Current Source
Selectable field consisting of three options and selecting one of
the drop downs will select that input source.
Auto
: Last source plugged in will be the active source
HDMI
: HDMI In will be the active source
USB-C
: USB-C In will be the active source
There can only be one active source at a
time. Recommended to leave Auto selected
for majority of installations.
Video Preview Area
When Preview Image is enabled will display a snapshot of the
current input source.
Clicking on the preview image will open a
pop-up showing a larger preview image.
