Harman AMX N2600 Series, Instruction Manual

Page: 58 / 95

Decoder Configuration Options
N2615-WP/N2625-WP Manual
58
General Setup Section
The General Setup section of the Home page is shown in Figure 53 . Options are described in Table 29 .
FIG. 53
General Setup Section
TABLE 29
Home Page: General Setup Section
Option Description Notes
IGMP Join on stream
loss
When enabled will send IGMP Join messages when no
incoming stream is detected.
IGMP Join Interval Determines how often (in seconds) the unit transmits
IGMP Join messages.
Enable Send Status Enables the encoder to send a periodic status packet to
the
Send Status Address
listed.
Send Status Address
When Enable Send Status is enabled, the encoder
sends a periodic status packet to the IP address
specified here.
Status Interval (sec) Determines how often (in seconds) the unit transmits
status packets.
Gratuitous ARP Enables the encoder to send a periodic address
resolution protocol (ARP) packet to the network.
Arp Interval (sec)
Determines how often (in seconds) the unit transmits
gratuitous ARP packets.
Discovery Packet
Transmit
Enables the N-Series multicast discovery service (used
to identify units)
For N-Series devices to communicate with each other,
their multicast settings must be compatible.
Discovery Interval (sec) Determines how often (in seconds) the unit transmits
discovery packets.