Installing the HPX-1600
4
HPX-1600 Retractable Connection Port
Installing the HPX-1600
ATTENTION READ THIS FIRST!
WARNING: Only a professional, AMX-qualified installer should perform this installation. and the installation must conform to all
local codes. This product may not be installed by the end-user.
A typical installation will include several of various available modules listed in the
section on page 1. Each of
these modules has specific instructions for terminating their rear connections. Refer to the installation guide for each appropriate
module during the installation of the HydraPort system.
Read these instructions in their entirety before beginning the installation.
The installation requires specific steps to be performed the specified order.
Step 1 - Select an Installation Location
Note the space requirements for installing the system. FIG. 3 provides a dimensioned drawing of the HPX-1600 System (above and
below the table).
FIG. 3
HPX-1600 Space Requirements
