Harman AMX ENOVA DVX-3250HD-SP Instruction Manual Download Page 84

Page: 84 / 119

Programming

Instruction Manual - Enova DVX-325xHD/22xxHD All-in-One Presentation Switchers

SEND_COMMANDS

The commands listed in the following sections are for the switcher only. For generic NetLinx commands, see the NetLinx Integrated

Controllers WebConsole and Programming Guide.



The commands derive their input/output port addressing from the target D:P:S.



INPUT ports range from 5-14 for Audio and from 1-10 for Video, depending on the DVX model. HDMI inputs are capable of

carrying both digital audio and video signals



The extra ports 1 and 2 on the Audio subsystem represent MIC1 and MIC2 respectively.



There are four Audio output ports (05002:1:0, 05002:2:0, 05002:3:0, and 05002:4:0), depending on the DVX model.



Audio Output Port #1 is the Main Amp Output and most audio commands are addressed to this port.



Audio Output Ports 2-4 are the Line Outputs and normally track the Main Amp Output port with small exceptions.



There are four Video output ports (05002:1:0, 05002:2:0, 05002:3:0, and 05002:4:0), depending on the DVX model.



Input and Output functional distinctions are disambiguated from the overlapped port numbers by combining them with the

command name.

Port Functionality Mapping

The following table lists the port functionality mapping for the audio/video ports on the DVX (not all ports available on each DVX

model):

Port Numbers

The following table lists the port numbers for the DVX:

Port Functionality Mapping

Port Number

Description

Address

Audio/Video Input 1

05002:1:0

Audio/Video Input 2

05002:2:0

Audio/Video Input 3

05002:3:0

Audio/Video Input 4

05002:4:0

Audio/Video Input 5

05002:5:0

Audio/Video Input 6

05002:6:0

Audio/Video Input 7

05002:7:0

Audio/Video Input 8

05002:8:0

Audio/Video Input 9

05002:9:0

Audio/Video Input 10

05002:10:0

Audio Input 11

05002:11:0

Audio Input 12

05002:12:0

Audio Input 13

05002:13:0

Audio Input 14

05002:14:0

Mic In 1

05002:1:0

Mic In 2

05002:2:0

Audio Output 1 (Amplified)

05002:1:0

Audio Output 2

05002:2:0

Audio Output 3

05002:3:0

Audio Output 4

05002:4:0

Audio/Video Output1

05002:1:0

Audio/Video Output2

05002:2:0

Audio/Video Output3

05002:3:0

Audio/Video Output4

05002:4:0

DVX Port Numbers

DVX Model

RS-232

RS-422/485

IR/Serial

I/O

Relay

DVX-325xHD

2-4, 6-8

1, 5

11-18

DVX-22xxHD

2-4

11-14

Summary of Contents for AMX ENOVA DVX-3250HD-SP
























































































































Search results

Summary of Contents for AMX ENOVA DVX-3250HD-SP

Reviews:

Related manuals for AMX ENOVA DVX-3250HD-SP

Brands by name

Popular brands

Harman AMX ENOVA DVX-3250HD-SP, Instruction Manual

Search results

Summary of Contents for AMX ENOVA DVX-3250HD-SP

Reviews:

Related manuals for AMX ENOVA DVX-3250HD-SP

Brands by name

Popular brands