Wiring and Device Connections
41
Instruction Manual - Enova DVX-325xHD/22xxHD All-in-One Presentation Switchers
The following table lists the pinouts for the RS-232/422/485 ports.
In the above table, pin 1 is located on the right side of the port, and the pinouts count up to the left.
Relay Ports
The relay ports (port 21 on the DVX) are 8-pin 3.5 mm mini-Phoenix (male) connectors used for connecting external relay devices.
The DVX-325xHD features 2 sets of 8-pin relay connectors. The DVX-22xxHD features one set of connectors. You can connect up to
8 independent external relay devices on the DVX-325xHD, and 4 on the DVX-22xxHD. When a relay is "OFF", terminals A and B are
open-circuit. When a relay is "ON", terminals A and B are shorted together.
Relay Connections
Use connectors A for common and B for output (FIG. 48). Each relay is isolated and normally open.
A metal connector strip is also provided to common multiple relays.
FIG. 48
RELAY connector (male)
8-channel single-pole single-throw relay ports
Each relay is independently controlled
Supports up to 8 independent external relay devices (4 on the DVX-22xxHD)
Channel range = 1-8
Each relay can switch up to 24 VDC or 28 VAC peak @ 1 A
Two 8-pin 3.5mm mini-Phoenix (male) connector provides relay termination (One connector on the DVX-22xxHD)
RS-232/422/485 Port Pinouts
Pin 1
GND (used in RS-232 and RS-422)
Pin 2
RXD (used in RS-232)
Pin 3
TXD (used in RS-232)
Pin 4
CTS (used in RS-232)
Pin 5
RTS (used in RS-232)
Pin 6
TX+ (used in RS-422 and RS-485)
Pin 7
TX- (used in RS-422 and RS-485)
Pin 8
RX+ (used in RS-422 and RS-485)
Pin 9
RX- (used in RS-422 and RS-485)
Pin 10
+12V
DVX-325xHD
DVX-22xxHD