Harman AMX CTC-1402, User Manual

Page: 35 / 64

User Manual - CTC-1402 34
Troubleshooting
1. Power : Ensure all devices are powered on (sources, transmitter, receiver and display).
2. Indicator
: Please make sure all LED indicators of the receiver is normal according to the user manual.
3. Devices : Ensure picture can be shown normally when directly connecting a source to a display device.
4. Cable
: Plug in and out HDMI/Cat X cable or try another HDMI/Cat X cable.
• Ensure the cable length being used is within available transmission range according to the Specification Section.
•
Cat 5e/6/6a/7 cable is recommended. Do not use Cat 5 cable.
•
Ensure both connectors of each Cat X cable are the same standard (EIA/TIA 568B).
5. Compatibility : Test other source and display devices to determine correct compatibility.