Harman AMX CTC-1402, User Manual

Page: 27 / 64

User Manual - CTC-1402
28
• OFF:
The panel buttons are active for switching the sources and displays.
HDCP
In this column, users can Enable/Disable the HDCP of TX HDMI IN, USB-C, RX HDMI IN1, and RX HDMI IN2 ports and set
HDCP for HDMI Output from FOLLOW, HDCP 2.2, HDCP 1.4 and NO HDCP.
• ON: Click to enable HDCP compatibility for the corresponding input, which will transmit HDCP protected content
(default setting).
• OFF:
Click to disable HDCP compatibility for the corresponding input, which will transmit non-HDCP protected content.
For HDMI Out:
• FOLLOW: Select to follow the output display’s HDCP compatibility for the HDMI Out, which will transmit content with the
same HDCP compatibility as that of the output display (default setting).
• HDCP 2.2: Select to transmit HDCP 2.2 protected content to the output display.
• HDCP 1.4:
Select to transmit HDCP 1.4 protected content to the output display.
•
NO HDCP:
Select to transmit non-HDCP protected content to the output display. ()
• Apply: Click to make the selection to take effect.
Note: If “ NO HDCP ” is selected for HDMI OUT, when the HDCP protected signal is being input, the receiver will output no
signal.
EDID
In this column, the input EDID can be set to system requirements. Click the drop-down menu to select resolution, click
“
Apply ” to take effect.