Harman AMX CTC-1402, User Manual

Page: 15 / 64

User Manual - CTC-1402
16
Installation and Wiring
Brackets Installation
Warning:
Before installation, ensure the device is disconnected from the power source.
Steps to install the device in a suitable location:
1. Attach the installation bracket to the enclosure using the screws provided. The bracket height can be adjusted
Up/Down>The bracket can face up or down.
2.
The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the unit.
4. Attach the brackets to a surface or suitable location with user supplied screws.
5. Repeat steps 1~4 to install the receiver.
Wiring
Warning:
• Before wiring, disconnect the power from all devices. Connecting.
•
Disconnecting cables while powered, may cause damage to circuitry or possible injury. Connect and disconnect the cables
with care.