Harman AMX CTC-1402, User Manual

Page: 22 / 64

User Manual - CTC-1402
23
After configuring each port respectively, control commands can be sent to the device.
Note:
IDs and IP addresses in the following illustrations are examples. Check the Online Tree in NetLinx Studio to find the
correct addresses for your device.
Send Commands to Control a Device
Click “
Diagnostics
” on the menu bar, choose “
Control a Device
”.
A window will display as follows, enter a command in the textbox, and click “ Send To Device ”. (For API commands, see the
Section API Command Set.)
Telnet Control via NetLinx Studio
1.
Choose the device you want to control, right click, then choose
TELNET Window
->
Launch TELNET window via NetLinx
Studio , enter the Telnet window, input the Telnet API in this window to control the device.
Note: For API Commands, see the section API Command Set .