![background image](http://html1.mh-extra.com/html/harman-kardon/avr-dvd-system/avr-dvd-system_owners-manual_4031012031.webp)
31
ENGLISH
PLAyBACK BASICS
Playback Basics
Basic Play
Preparation
Switch the TV ON and select its video input connected
1.
to the DVD.
Press POWER to turn on the unit, the DVD Harman/
2.
Kardon logo should appear now on the screen.
If that logo appears distorted on the screen or
without any color, change the appropriate settings
at the Picture Settings menu according to your TV
set. See Picture Settings Menu, on page 33, for
details.
If you see no video at all, not even the Harman/Kardon
3.
logo, check the setting of the video input used on
your TV.
Switch on your A/V system’s power, if the player has
4.
been connected to such a system.
Press OPEN/CLOSE to open the disc tray.
5.
Place a disc on the disc tray.
6.
Hold the disc without touching either of its surfaces,
position it with the side you wish to play facing down,
align it with the guides, and place it in its proper
position.
3" (8 cm) discs or 5" (12 cm) discs can be used.
■
Press PLAy. The disc tray is automatically closed and
7.
play begins.
When the disc tray is closed by pressing OPEN/
■
CLOSE, play will start automatically.
With most DVD’s, a Disc Menu appears on the
■
screen. Select specific menu item by using the
remote's Navigation buttons, then press OK.
Note
: To conserve power,the DVD player will
automatically enter the Standby mode after 10
minutes of inactivity.
Disc Playback Features
Skipping tracks or titles/chapters
To move forward or backward through the tracks on
a CD or the titles or chapters on a DVD, press Skip Up/
Skip Down
N
on the remote.
Fast Motion Playback/Fast Search
To move forward or backward through the DVD or CD
1.
disc being played at fast speed, press Search on the
remote. Once one of these buttons is pressed, the
fast search will continue until Play is pressed.
There are four fast-play speeds. Each press of the FF/
Rew
M
Buttons will cycle to the next speed in the
following order: x2, x4, x8, x20, indicated on the
screen.
Press PLAy
2.
M
at any time to resume normal
playback.
Note that there will be no audio playback during fast-
forward or -reverse play of DVD discs. This is normal
for DVD, as A/V receivers and surround processors
cannot process the digital audio streams during fast-
play modes; audio will be heard during fast-play of
conventional CD’s.
Freeze Frame and Frame Advance
(with DVD only)
Press PAUSE
1.
M
when a DVD is playing to freeze
the picture.
Each time you press one of the STEP (FWD)
2.
buttons
M
, the picture advances one frame.
Press PLAy
3.
M
to resume normal playback.
Slow Motion Playback (with DVD only)
When a DVD disc is in pause or freeze frame
1.
mode, you may move slowly forward or backward
through the program being played at one of the
speeds by pressing the FF/Rew
M
Buttons on the
remote. Each press of the buttons will move to the
next speed, indicated on the screen.
Press PLAy
2.
M
to resume normal playback.
Note that there will be no audio playback during slow-
forward or -reverse play of DVD discs. This is normal for
DVD, as A/V receivers and surround processors cannot
process the digital audio streams during slow modes.
Slow play is not available for CD.
Notes
: Playback features may not be available during
the opening credits of a movie. This is intended by the
disc author and is not a failure of the DVD.
Playback of a DVD with 96kHz/24-bit audio requires
the use of circuitry normally used for other features.
Accordingly, Slow Play Reverse and Step Advance
features are not available with these discs.