•
Before placing the Jar on the Blender Base, ensure that the Filler
Cap is turned clockwise and securely locked into the Lid. Then push
the Lid/Cap firmly onto the Jar.
NEVER remove the Cap or add ingredients while the hot contents
are being processed.
•
Extreme caution must be used when moving a Jar containing hot
liquids.
•
With Jar in place on Blender Base turn the Speed Control
counter-clockwise to the minimum setting. Flip the On/Off Switch
to the On position (‘I’) then slowly increase the speed to maximum.
Allow the Blender to run until the desired temperature or
consistency is reached.
•
DO NOT remove the Lid, Cap or Jar until the Blender is switched
to the Off position (‘O’), the Cord has been unplugged and the
blades have stopped turning.
•
Once the Jar has been removed from the Blender, carefully twist
and lift off the Cap to permit excess steam to escape.
CAUTION: The Cap may be hot.
•
WARNING: The Drive Socket, Locking Nut and Blades become very
hot. DO NOT touch. Allow to cool down before handling or cleaning.
HELPFUL HINTS
•
While the motor is running, ingredients can be added, with care,
through the Filler Cap opening in the center of the Lid. When
processing hot ingredients do not add ingredients through the Filler
Cap.
•
To crush ice, place the ice cubes into the Jar. Close the Lid and place
on the Blender Base. Press and release the Pulse Switch. Repeat
until the desired consistency is reached. Add a little water through
the Filler Cap opening for a slushier consistency.
CARE AND CLEANING
Before first and after each subsequent use, follow the directions in the
Regular Cleaning section.
REGULAR CLEANING
Jar, Lid, Cap and Tamper
1.
Remove the plug from the wall outlet.
2. Remove the Jar from the Blender Base and empty the Jar
completely. Rinse the inside with warm water.
3. Then add 2 drops of liquid dishwashing soap and 4 cups (1 L) of
warm water to the Jar.
4. Lock the Cap into the Lid and push the Lid tightly onto the Jar.
Place the Jar on the Blender Base.
7